Avoiding Accidents With Sheet Metal Bending Machinery

Avoiding Accidents with Sheet Metal Bending Machinery

Avoiding Accidents with Sheet Metal Bending Machinery – The metal bending process is designed to reshape sheet metal and tubes as required. In sheet bending and tube bending, the manufacturers can implement different ways to deform the metal. For this task, sheet metal is ideal because it is among the most versatile metals available.

Precautions in Sheet Metal Bending Operation

To ensure safe operations with sheet metal bending machines without compromising productivity, employers should establish clear safety norms and make sure that the workers understand and follow them.

  1. Learn about the Machinery and its Operation

Before a worker begins operating a sheet bending machine, they should acquire a basic understanding of the machine and its functions and how it is performed. They must carefully refer to the instruction manual to know the device better. If the worker has no previous experience in handling sheet bending machinery, the employer should ensure that they are provided with formal training before they are allowed to operate it.

  1. In Cold Temperatures, Warm Up the Machine First

For safe operation with sheet bending machinery in cold temperatures, the machine should be warmed up for a few minutes before it is operated. The worker should be trained to first set the machine in motion and let it run idle for a few minutes. Once the machine is warmed up, it reduces the risk of the parts getting stressed or breaking down. The worker is then all set to produce the safe and best results with a warmed-up sheet metal bending machine.

  1. Place the Sheet at the Correct Angle

For a safe sheet metal bending operation, the worker should make sure they are holding the sheet at the correct angle. Before the bending process begins, the sheet should be placed parallel to the bender. If the operation is performed with a wrongly placed sheet, it may result in the sheet hitting the worker’s body and causing injury.

  1. Mind Your Fingers and Hands

Workers should be mindful of their hands and fingers when they operate the sheet bender. When the sheet is placed on the bender, the worker should ensure that their hands and fingers are at a safe distance. A momentary lapse of attention can lead to a serious accident or a permanent injury.  

Quick Safety Tips for Safe Sheet Metal Operation

  • Always use safety gloves to protect against injury to your hands from sharp equipment.
  • Wear safety goggles to prevent fine particles from flying into your eyes during the sheet metal bending process.
  • Never operate without work boots to ensure that your feet are not injured from any scrap metal or pointed material.
  • Even while wearing gloves, do not run your hand over a sharp metal cut.
  • Make sure that the burr is properly filed.
  • Clear all the metal scrap and keep the work surface clean to minimize the risk of injury.

Care with Wet Metal Sheets

Workers should remember to handle a wet metal sheet with maximum care. The wet surface of the sheet will contain moisture. When it gets mixed with oil and dirt, it will make the surface of the sharp metal sheet slippery, making it hard to hold.

Watch YouTube Video: How to Use a Metal Bender- Steel Sheetmetal Brake. This video provides tips on how to bend metals such as aluminum and steel.

Machine Accident Lawyers in Sacramento

I’m Ed Smith, a machine accident lawyer in Sacramento. Sheet metal bending machines are dangerous and should be used with caution. If you or someone you know has been injured in a metal bending machine accident, call me for a free consultation at 916-584-9355.

I’ve helped numerous residents in Sacramento and throughout Northern California receive full compensation for their wrongful death and personal injury cases since 1982.

Photo by NeONBRAND on Unsplash

:br cha [cs 630]

Leave a Reply

Your email address will not be published. Required fields are marked *